Umshini Wokugaya Okunembayo Inhloso Yomshini Wokugaya I-Cylindrical Wendawo Yonke
* Isingeniso
1. Umzila wesitimela wesokunxele nesokudla wamukela isakhiwo se-PV, esikwalwa ngemanuwali enembayo ephezulu, ukuze yonke imikhiqizo yesistimu ibe nokunemba okuphezulu nokuzinza okuphezulu.
2. Umzila wesitimela ohamba phambili nangemuva wesondo lokugaya ungakhetha i-roller kanye nesakhiwo sesitimela socingo.
3. Indlela yokulawula yakudala, elula, ephephile futhi enokwethenjelwa.
4. Umzila wesitimela osebenzayo futhi ogayayo wesitimela usebenzisa isitimela esizinzile esiphezulu se-hydrostatic, i-high rigid dynamic and static pressure spindle.
5. Ikhanda lomsebenzi jikelele lingalungiswa kunoma iyiphi i-engeli ngaphakathi kwamadigri angu-90 ngokuphambene newashi ukuze livumelane ne-chuckgrinding workpiece yokulawula yangaphakathi nangaphandle.
| Incazelo | Iyunithi | Ukucaciswa | ||||||||
| Into NO. | 122015 | 122016 | 122027 | 122028 | 122029 | 122030 | 122031 | 122032 | 122033 | |
| Imodeli | UCG2050 | UCG2075 | UCG32100 | UCG32150 | UCG32200 | UCG32300 | UCG50150 | UCG50200 | UCG50300 | |
| Amandla Ajwayelekile |
| |||||||||
| I-Max.length ground(OD) | mm | 500 | 750 | 1000 | 1500 | 2000 | 3000 | 1500 | 2000 | 3000 |
| Ubude obumaphakathi | mm | 135 | 180 | 180 | 270 | |||||
| Dia.Indawo (OD) | mm | 8-200 | 8-320 | 8-320 | 25～500 | |||||
| Dia.Indawo(ID) | mm | 25-100 | 30-100 | 30-100 | 30-200 | |||||
| I-Max.length ground(ID) | mm | 125 | 125 | 125 | 320 | |||||
| Isisindo esiphezulu sesiqephu somsebenzi | kg | 100 | 150 | 500 | 1000 | |||||
| Ikhanda lomsebenzi |
| |||||||||
| I-angle ejikelezayo | º | 90 | 90 | 90 | 90 | |||||
| I-Center taper(MT) | MT | 4 | 4 | 5 | 6 | |||||
| Isivinini se-spindle/Izitebhisi | r/min | 50HZ: 26–260 | 50HZ: 26–260 | 50HZ: 26–260 | 50HZ: 20–224 | |||||
| Isondo lamasondo |
| |||||||||
| Ubukhulu bobukhulu besondo(OD*W*ID) | mm | 400×50×203 | 400×50×203 | 500×50×203 | 500×75×305 | |||||
| Ijubane le-peripheral yesondo | m/s | 35 | 35 | 35 | 35 | |||||
| Isiphakeli sesandla per.rev | mm | rough:2 | rough:2 | rough:2 | rough:4 | |||||
| mm | kuhle:0.5 | kuhle:0.5 | kuhle:0.5 | kuhle:0.5 | ||||||
| Isiphakeli sesandla per.gra | mm | rough:0.01 | rough:0.01 | rough:0.01 | rough:0.02 | |||||
| mm | inhle:0.0025 | inhle:0.0025 | inhle:0.0025 | inhle:0.0025 | ||||||
| Idivayisi yokugaya yangaphakathi |
| |||||||||
| Isivinini se-spindle | r/min | 10000 | 10000 | 10000 | 10000 | |||||
| Ubukhulu besondo | mm | ubuningi:50×25×13 | ubuningi:50×25×13 | ubuningi:50×25×13 | ubuningi:175×32×32 | |||||
| mm | imiz:17×20×6 | imiz:17×20×6 | imiz:17×20×6 | imiz:30×25×10 | ||||||
| Ithebula |
| |||||||||
| I-Max.swiveling angle yeThebula(Cockwise) | º | 3º | 3º | 3º | 3º | 2º | 2º | |||
| I-Max.swiveling angle yeThebula(Anti iwashi) | º | 9º | 8º | 7º | 6º | 5º | 3º | 6º | 5º | 3º |
| Ububanzi besivinini sobude betafula | m/min | 0.1～4 | 0.1-4 | 0.1-3 | 0.1-3 | |||||
| I-Tailstock |
| |||||||||
| I-Center taper(MT) | MT | 4 | 4 | 5º | 6 | |||||
| Khipha ukuhamba | mm | 30 | 30 | 30 | 70 | |||||
| Imoto |
| |||||||||
| Amandla e-wheelhead motor | Kw | 4 | 5.5 | 7.5 | 5/7.5 | |||||
| Ukugaya kwangaphakathi | Kw | 1.1 | 1.1 | 1.1 | 1.5 | |||||
| Amandla e-workhead motor | Kw | 1.1 | 1.5 | 1.5 | 4 | |||||
| Ukunemba komshini |
| |||||||||
| Ukujikeleza | μm | 2 | 2.5 | 3 | 2.5 | 3 | 3 | |||
| I-Cylindricity | μm | 5 | 8 | 8 | 8 | 8 | 8 | 8 | ||
| Ubulukhuni | μm | I-Ra0.2 | I-Ra0.2 | I-Ra0.32 | I-Ra0.32 | |||||
| Umshini |
| |||||||||
| Isisindo esikhulu | kg | 4100 | 4300 | 4600 | 5100 | 6200 | 7600 | 10000 | 11000 | 13000 |
| Ubukhulu bokupakisha | cm | 235*203*205 | 275*203*205 | 326*190*205 | 426*190*205 | 580*190*205 | 780*190*205 | 543*225*210 | 583*225*210 | 796*225*210 |
| Incazelo | Iyunithi | Ukucaciswa | ||||||||||||
| Into NO. | 122103 | 122104 | 122105 | 122106 | 122111 | 122112 | 122113 | 122121 | 122122 | 122123 | 122131 | 122132 | 122133 | |
| Imodeli | CGM32100 | CGM32150 | CGM32200 | CGM32300 | CGM50150 | CGM50200 | CGM50300 | CGM63300 | CGM63400 | CGM63500 | CGM80300 | CGM80400 | CGM80500 | |
| Amandla Ajwayelekile | ||||||||||||||
| I-Max.length ground(OD) | mm | 1000 | 1500 | 2000 | 3000 | 1500 | 2000 | 3000 | 3000 | 4000 | 5000 | 3000 | 4000 | 5000 |
| Ubude obumaphakathi | mm | 180 | 180 | 270 | 370 | 500 | ||||||||
| Dia.Indawo (OD) | mm | 8-320 | 8-320 | 25 - 500 | 30-630 | 50~800 | ||||||||
| Isisindo esiphezulu sesiqephu somsebenzi | kg | 150 | 500 | 2000 | 3000 | 3000 | ||||||||
| Ikhanda lomsebenzi |
| |||||||||||||
| I-Center taper(MT) | MT | 5 | 5 | 6 | Metric 80# | Metric 80# | ||||||||
| Isivinini se-spindle/Izitebhisi | r/min | 50HZ: 19–190 | 50HZ: 10–100 | 50HZ: 10–100 | 50HZ: 6-60 | 50HZ: 5–50 | ||||||||
| Isondo lamasondo |
| |||||||||||||
| Ubukhulu bobukhulu besondo(OD*W*ID) | mm | 600×75×305 | 600×75×305 | 750×75×305 | 750×75×305 | 900×75×305 | ||||||||
| Ijubane le-peripheral yesondo | m/s | 35 | 35 | 35 | 35 | 35 | ||||||||
| Isiphakeli sesandla per.rev | mm | rough:2 | rough:2 | rough:4 | rough:4 | rough:4 | ||||||||
| mm | kuhle:0.5 | kuhle:0.5 | kuhle:0.5 | kuhle:0.5 | kuhle:0.5 | |||||||||
| Isiphakeli sesandla per.gra | mm | rough:0.01 | rough:0.01 | rough:0.02 | rough:0.02 | rough:0.02 | ||||||||
| mm | inhle:0.0025 | inhle:0.0025 | inhle:0.0025 | inhle:0.0025 | inhle:0.0025 | |||||||||
| Ithebula |
| |||||||||||||
| I-Max.swiveling angle yeThebula(Cockwise) | º | 3º | 3º | 3º | 2º | 2º | 1º | 1º | ||||||
| I-Max.swiveling angle yeThebula(Anti iwashi) | º | 7º | 6º | 5º | 3º | 6º | 5º | 3º | 3º | 2º | 1.5º | 3º | 2º | 1.5º |
| Ububanzi besivinini sobude betafula | m/min | 0.1-4 | 0.1-3 | 0.1-3 | 0.1-2.5 | 0.1-2.5 | ||||||||
| I-Tailstock |
| |||||||||||||
| I-Center taper(MT) | MT | 4 | 5 | 6 | Metric 80# | Metric 80# | ||||||||
| Khipha ukuhamba | mm | 30 | 30 | 70 | 70 | 70 | ||||||||
| Imoto |
| |||||||||||||
| Amandla e-wheelhead motor | Kw | 11 | 11 | 15 | 22 | 22 | ||||||||
| Amandla e-workhead motor | Kw | 1.5 | 3 | 4 | 15 | 15 | ||||||||
| Ukunemba komshini |
| |||||||||||||
| Ukujikeleza | μm | 2.5 | 3 | 2.5 | 3 | 3 | 3 | 3 | ||||||
| I-Cylindricity | μm | 8 | 8 | 8 | 8 | 8 | 8 | 12 | 12 | 8 | 12 | 12 | ||
| Ubulukhuni | μm | I-Ra0.2 | I-Ra0.32 | I-Ra0.32 | I-Ra0.32 | I-Ra0.32 | ||||||||
| Umshini |
| |||||||||||||
| Isisindo esikhulu | kg | 4600 | 5100 | 6200 | 7600 | 10000 | 11000 | 13000 | 22000 | 23000 | 26000 | 22000 | 23000 | 26000 |
| Ubukhulu bokupakisha | cm | 326*190*205 | 426*190*205 | 580*190*205 | 780*190*205 | 543*225*210 | 583*225*210 | 796*225*210 | 876*240*226 | 1100*240*226 | 1270*240*226 | 876*240*230 | 1100*240*230 | 1270*240*230 |
| Izesekeli Ongazikhethela |
| Uhlaka lokulinganisa isondo lokugaya |
| Ukuhlukaniswa kwamagnetic |
| Isihlungi sesikhwama sephepha |
| Idivayisi Yesikhungo Sokugaya |
| Vala Uhlaka Lwesikhungo |
| I-Device End dresser |
| Isigqoko esiyindilinga sedivayisi |
| Izesekeli Ezijwayelekile |
| Ithangi lamanzi okupholisa |
| Isigqoko esiyindilinga sangaphandle |
| Ukugaya i-wheel chuck namathuluzi okuphatha |
| Isondo lokugaya elijwayelekile |
| I-Balance shaft |
| Insimbi ye-leveling pad |
| Isibani esisebenzayo |
| Vula uzimele ophakathi |
| Isikhungo |
| Ama-abrasives ayindilinga angaphakathi |
