Ilathe Evundlile Ukunemba Okuphezulu Kanye Nelathe Yenjini Enzima
* Isici
- I-Precision ground kanye ne-supersonic frequency hardened bed way yakhelwe ngodonga oluphindwe kabili, inika ukuqina okumangalisayo.
- Isistimu yokuphotha iphezulu ngokuqina nokunemba.
- Idizayini yedrayivu eyinhloko yenziwe kahle futhi amagiya esitokisini asendaweni enembile.
- uphansi umsindo womshini.
- Asikho isidingo sokushintsha amagiya.
- Umshini ungaphendula izinhlobo ezingaba ngu-200 zemethrikhi, inani elingakanani, imojula kanye nentambo ye-DP.
- Umshini wokumisa othomathikhi usetshenziselwa ukubona ukumisa okuzenzakalelayo komshini wocwecwe oluthile lobude, oluphephile.
- Idivayisi ye-pedal braking ehlinzeka ngokuma okusheshayo nangempumelelo ngenkathi isebenza.
| Imodeli | L5841x1000 | L5841x1500 |
| Swayipha phezu kombhede | Φ410mm (16") | Φ410mm (16") |
| Swayipha phezu kwesilayidi esiphambene | Φ224mm(8 13/16") | Φ224mm(8 13/16") |
| I-Swing in gap(D×W) | 640mm×218mm | 640mm×218mm |
| Ukuphakama kwesikhungo | 205mm(8 5/64") | 205mm(8 5/64") |
| Ibanga phakathi kwezikhungo | 1015 mm | 1515 mm |
| Ububanzi bombhede | 300mm(11 3/4") | 300mm(11 3/4") |
| Ubukhulu.ingxenye yethuluzi lokusika | 25mm×25mm(1"×1") | 25mm×25mm(1"×1") |
| Isamba sohambo lwesilayidi esiphambanayo | 290mm(11 3/8") | 290mm(11 3/8") |
| Uhambo oluphelele lwesilayidi esiphezulu | 120mm(4 3/4") | 120mm(4 3/4") |
| Spindle bore | Φ82mm(3 1/4") | Φ82mm(3 1/4") |
| Ikhala lokuphotha | D1-8 | D1-8 |
| I-spindle morse taper emakhaleni, emkhonweni | ME90/MT#5 | ME90/MT#5 |
| Inombolo yesivinini sophimbo | 12 | 12 |
| Ibanga lezivinini zokuphotha | 25-2000 RPM | 25-2000 RPM |
| Ihlanganisa izintambo ze-imperial | 4-112(50 NOS) | 4-112(50 NOS) |
| Imicu yemethrikhi | 0.25-7(24 NOS) | 0.25-7(24 NOS) |
| I-Diametral pitches DP/DP | 4-112(50 NOS) | 4-112(50 NOS) |
| Izikhala ze-Diametral MP/MP | 0.25-14(34 NOS) | 0.25-14(34 NOS) |
| Inani lokuhamba kwe-tailstock quill | 120mm(4 3/4") | 120mm(4 3/4") |
| I-tails stock quill | Φ60mm(2 3/8") | Φ60mm(2 3/8") |
| I-Taper tailstock quill | MT#4 | MT#4 |
| I-spindle drive motor | 7.33HP(5.5KW) | 7.33HP(5.5KW) |
| Injini yepompo epholile | 4/75HP(0.04KW) | 4/75HP(0.04KW) |
| Ubukhulu bomshini | 88"×36"×49" | 110"×36"×49" |
| Ubukhulu bokupakisha | 93"×39"×62" | 114"×39"×62" |
| NW | 1680kg | 2010kg |
| GW | 1930kg | 2260kg |
| INOMBOLO YENTO. | 114045 | 114046 |
